Remove Antique Finish From Class Ring
A class ring is a symbol of pride and accomplishment for many people. It represents the hard work and dedication that has gone into achieving a degree. However, over time, the antique finish on the ring may wear off, leaving it looking dull and worn. If you want to restore your class ring to its former glory, then you need to remove the antique finish. Here is how you can do it:
Step 1: Gather Your Supplies
Before you start the process, make sure you have all the necessary supplies. You will need:
- A plastic container
- Acetone
- Soft-bristled toothbrush
- Polishing cloth
Step 2: Soak the Ring in Acetone
Fill the plastic container with acetone and place the ring inside. Make sure that the ring is fully submerged in the acetone. Leave it to soak for at least 30 minutes. This will soften the antique finish and make it easier to remove.
Step 3: Scrub the Ring
After the ring has soaked for at least 30 minutes, take it out of the acetone and use the soft-bristled toothbrush to scrub the antique finish off. Be gentle and take your time, making sure you remove all of the antique finish.
Step 4: Rinse and Dry the Ring
Once you have removed all of the antique finish, rinse the ring under running water to remove any remaining acetone. Dry the ring thoroughly with a soft cloth.
Step 5: Polish the Ring
Finally, use a polishing cloth to give the ring a shine. This will remove any remaining residue and give the ring a new, polished look.
Conclusion
If you want to restore your class ring to its former glory, then removing the antique finish is the first step. By following these simple steps, you can remove the antique finish and give your class ring a new lease of life.